1 fls connector connectors for fpc 0.5mm pitch emboss tape fjst compact connector with just 2.0mm high after mounting on the pc board. a vailable both in normal type and reverse type. features ?easy location of fpc the shrouded fpc entry point allows the fpc to be positioned and hold in place before the connector is locked. ?zero insertion force mechanism a zif mechanism increases wear resistance and extends the connector? mating life. heat resisting design suitable for surface mounting the housing is made of heat resisting resin to allow reflow soldering. ?in-line surface mounting has an in-line surface mount tails for easy inspection. ?two types of connections the connector is available in either the normal or reverse configurations. the fpc is positioned with its mating surfaces facing upward for the normal configured connector, while the reverse configuration requires that the fpc be positioned with its mating surfaces facing down. the engineer has greater freedom in designing his circuitry. ?embossed tape for automatic mounting the fls connector can be packaged in embossed tape for automatic mounting. specifications ?current rating: 0.5a ac, dc ?voltage rating: 50v ac, dc ?temperature range: -25?c to +85?c (including temperature rise in applying electrical current) ?contact resistance: initial value/40m ? max. after environmental testing/60m ? max. ?insulation resistance: 800m ? min. ?withstanding voltage: 200v ac/minute ?applicable fpc: conductor pitch/0.5mm conductor width/0.35mm mating part thickness/0.3?.03mm < note > fpc to be actually used should be checked for applicability. * compliant with rohs. * refer to "general instruction and notice when using terminals and connectors" at the end of this catalog. * contact jst for details. standards 0 recognized e60389 1 certified lr20812
2 connector fjst a c 3.0 5.5 (0.7) (0.7) 2.4 0.2 0.5 1.9 1.9 2.0 b fjst a c 3.0 5.5 2.4 0.2 0.5 1.9 2.0 1.9 b normal type reverse type circuits model no. normal type reverse type dimensions (mm) ab c q'ty / reel material and finish 6 7 9 10 12 13 15 16 17 18 19 20 22 24 26 28 30 06fls-sm1-tb 07fls-sm1-tb 09fls-sm1-tb 10fls-sm1-tb 12fls-sm1-tb 13fls-sm1-tb 15fls-sm1-tb 16fls-sm1-tb 17fls-sm1-tb 18fls-sm1-tb 19fls-sm1-tb 20fls-sm1-tb 22fls-sm1-tb 24fls-sm1-tb 26fls-sm1-tb 28fls-sm1-tb 30fls-sm1-tb 06fls-rsm1-tb 07fls-rsm1-tb 09fls-rsm1-tb 10fls-rsm1-tb 12fls-rsm1-tb - 15fls-rsm1-tb 16fls-rsm1-tb 17fls-rsm1-tb 18fls-rsm1-tb 19fls-rsm1-tb 20fls-rsm1-tb 22fls-rsm1-tb 24fls-rsm1-tb 26fls-rsm1-tb 28fls-rsm1-tb 30fls-rsm1-tb 2.5 3.0 4.0 4.5 5.5 6.0 7.0 7.5 8.0 8.5 9.0 9.5 10.5 11.5 12.5 13.5 14.5 3.55 4.05 5.05 5.55 6.55 7.05 8.05 8.55 9.05 9.55 10.05 10.55 11.55 12.55 13.55 14.55 15.55 8.5 9.0 10.0 10.5 11.5 12.0 13.0 13.5 14.0 14.5 15.0 15.5 16.5 17.5 18.5 19.5 20.5 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 contact: phosphor bronze, copper-undercoated, tin-plated (reflow treatment) slider housing: pa 46, ul94v-0 receptacle housing: pa 46, ul94v-0 normal type?atural normal type?ray reverse type?lack reverse type?atural solder tab: phosphor bronze, copper-undercoated, tin-plated (reflow treatment) rohs compliance this product displays (lf)(sn) on a label. note: the products listed above are supplied on embossed-tape. fls connector
3 note: 1. tolerances are non-cumulative: 0.03mm for all centers. 2. the dimensions above should serve as a guideline. contact jst for details. lead section dimensions of fpc pc board layout (viewed from component side) assembly layout 0.5x(n-1) 0.03 0.5x(n+1)0.05 5.5 3.0min. 0.350.04 0.30.03 reinforcing layer 0.50.1 0.50.03 3.30.1 1.60.1 0.150.1 0.350.05 0.50.03 1.20.1 5.5 contact point normal type reverse type contact point 2.0 note: n --- number of circuits fls connector
|
